Absorber, Tinten Filz   Ink Absorber - Part of Spittoon Assembly - Order Spittoon

C4714-60093 Bail assembly - Has star wheel assemblies attached

Belt, Zahnriemen, Antriebsriemen
C4706-60082 Carriage belt - Long/wide belt attached to the carriage

C4704-60073 Media Bin Arm (Loop Assembly) - Wire Form Arms that Make Up Media Bin (6 Used)

C3190-40040 Left encoder bracket - Holds left end of encoder strip
C4713-40017 Right encoder bracket - Holds right end of encoder strip

C1633-40082 Bushing - Retains Spring on Shaft of Pincharm Assembly (7 Used)

Cable, Kabel
C3180-60012 Cable - from Main Logic Board to Paper (X-Axis) Drive Motor
C4713-60182 Bail Link (Cable) - Between the Bail Engaging Lever and the Bail Gear Assembly
C4714-60181 Trailing Cable - from Electronics Module to Carriage Assy

C1633-20012 Pincharm Bar Cam - Long Rod From Left to Right Side of Printer - Used to Lift the Pincharms
C3190-40020 Bail lift cam - Mounted behind the bail engaging lever support
C3190-60149 Left Cam Jour l - Mounted on Left End of Pincharm Shaft

Carriage, Schlitten, Patronen Wagen
C4713-60039 Pen Carriage Assembly - Includes PC Board, Line Sensor, Carriage Height Guage, Carriage Bushings, and Instructions

1400-1021 Cable Clamp - Attached to Trailing Cable Guide - Used to Hold Trailing Cable in Place (4 Used)

Cleaning Supplies
C6247A DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags

C3190-00012 Clip - Attached to Left Encoder Bracket
C3190-00013 Clip - Attached to Right Encoder Bracket
C3190-00086 Trailing Cable Clip - Metal Clip Attached to Carriage Top Cover
C4699-60072 Cable Clip - Attaches to Rear of Printer

Clutch, Kupplung
C4713-60129 Overdrive Clutch Assembly - Small, Wide Gear Near Overdrive Gear - Held in Place with a Retaining E-Ring

C4713-40029 Left end cover
C4713-40038 Carriage top cover
C4713-60030 Right end cover
C4714-60014 Top cover assembly
C4714-60097 Back cover assembly

C4704-60077 Cross-brace - Main structure that extends between stand legs

Cutter, Messer
C4713-60040 Cutter assembly - Mounts on carriage slide rod to the right of the carriage

C4713-60117 Media deflector with media button - The media deflector furthest to the right side - Includes media load button
See Description Media Deflector Without Media Button (1 Used for D/A1 Size, 2 Used for E/A0 Size) - Not Available Separately - Order Overdrive
Roller Assembly

Cap C3174-40011 Spindle Hub, 2in - Not for Asian Media in Chi  (2 Used)

C4713-60038 Media Extension Kit - Includes 3 Extensions - Attached to Media Deflectors (2 Extensions Used for D/A1 Size Printer, 3 Used for E/A0 Size Printer)

Fan, Lüfter   Cooling Fan is Part of the Electronics Module - Please Refer to Module

C6082-60074 Firmware Upgrade Kit - Upgrades to Version A.01.06

C4704-60086 Foot Assembly (Includes Casters) - Mounts to the Bottom of Left and Right Plotter Stand Legs (2 Used)

Front Panel, Bedienfeld
C4713-60091 Front panel assembly - Complete

Gear, Zahnrad
C1633-40019 Overdrive Gear - Mounts to the Left Side Plate of the Plotter Below the Clutch Assembly
C1633-40027 Bail Engaging Lever Gear - Small Gear Mounted on the Support for the Bail Lift Cam Gear and the Bail Lift Engaging Gear (P/O the Bail Lift Mechanism Kit)
C3190-40019 Bail Lift Cam Gear - Large Gear Mounted on the Support for the Bail Lift Cam Gear and the Bail Lift Engaging Gear (P/O the Bail Gear Assembly)

C4700-60052 Trailing Cable Guide - Tray Used to Hold and Guide Trailing Cable
C4713-60184 Rollfeed guide kit - Left and right guides mounted under printer - Used to attach rollfeed housings to the printer

Handle, Papier Hebel
C4713-40025 Pinchwheel manual lift handle - Paper loading lever

0510-0083 Retaining E-Ring - Holds Clutch Assembly in Place

Hardware Kit
C4704-60095 Hardware Kit - Used to Assemble Printer Stand - Includes Screw Driver, Screws, Washers and Media Bin Retaining Clips

C3190-40052 Holder - for Quick Reference Guide - on Right End Cover

C4713-60120 Spindle Hub Kit, Small Size - Includes 2 Small Hubs and Install Guide - for Asian Media in Chi  Only

Keycap, Schalter Kappe
C4713-40046 Power switch button/keycap

5961-3524 Serial Number Label - Located on Right End Cover
C3178-00030 Carriage label - Shows ink cartridge location
C4705-00017 Instruction Label - Mounts on Top of Left End Cover

C4704-60075 Leg Assembly - Side Support for the Plotter (2 Used) - Does NOT Include the Foot Assembly

C3190-40022 Bail engaging lever - Small item that holds one end of bail cable - S ps into bail engaging lever support

Lever Assembly
C4713-60116 Right Cam Jour l Assembly - 2 Levers and a Metal Rod - 1 Lever Mounted on Right End of Pincharm Shaft and the Other Lever Mounted to Pinchwheel Manual Lift Handle

Memory (Product)
C3132A 4MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)
C3133A 8MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)
C3146A 16MB, 70nS, 36-bit SIMM memory module upgrade - Includes one SIMM
D2297A 16MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)
D3578A 32MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)

Memory (SIMM)
C3132-67901 4MB Parity SIMM Memory Module - 70nS, 36 Bit (C3132A)
C3133-67901 8MB Parity SIMM Memory Module - 70nS, 36 Bit (C3133A)
C3146-67901 16MB SIMM memory module
D2297-69001 16MB Parity SIMM Memory Module - 70nS, 36 Bit (D2297A) REQUIRES RETURN OF DEFECTIVE PART(New part = D2297-63001)
D3578-69001 32MB Parity SIMM Memory Module - 70nS, 36 Bit (D3578A) REQUIRES RETURN OF DEFECTIVE PART(New part = D3578-63001)

C4713-60092 Carriage motor assembly - Includes cable

C4713-60094 Paper (X-Axis) Drive Motor (Includes Helical Drive Gear) - Attaches to Right Side of Plotter Chassis - NOTE: Motor and Gear are Only Sold as an Assembly

PC Board, Netzteil, Mainboard   Power Supply and Main Logic PC Board are Part of the Electronics Module - Please Refer to Module

C4699-60081 Pincharm Assembly - Curved Black Plastic Plate with 4 Small Rubber Rollers (Does NOT Include Spring or Bushing) (7 Used)

Platen, Walze
C4714-60114 Entry Platen Assembly - Curved cover/guide that is next to the paper drive (Platen) roller

Primer, Pumpe
C4713-60023 Primer assembly - Mounted on left side of plotter

Pulley, Umlenkrolle
C3190-60132 Idler Pulley - for Main Drive Belt - on Left End of Plotter - Includes Pully, Shaft and Spacer

C4700-60042 Paper Drive (Platen) Roller Assy - Long Gear Driven Roller - Includes Roller and Mark Encoder (Attached to Left End)
C4714-60115 Overdrive roller assembly - Includes overdrive shaft with rollers, overdrive housing, 2 media deflectors without media button, and media deflector with media button

Rollfeed Kit, Spindel Halterung
C4719A E/A0 rollfeed kit - Includes left and right housing, hubs, spindle, end caps, screwdriver, and screws

C4713-60034 Pincharm Sensor Assembly - Mounted on Right Side Near the Right Cam Jour l

Service Station, Reinigungs-Station
C3190-60142 Service Station Assembly - Mounted Behind Primer Assembly - 4 Tubes From Ink Separator Plug Into Assembly

Spindle, Achse für Rollen Papier
C4719-60005 E/A0 rollfeed spindle rod assembly - Includes spindle, hubs, and end caps

Spindle Kit, Achse für Rollen Papier
C6239A E/A0 Rollfeed Spindle Rod Assembly - Includes Spindle, Hubs, and End Caps

Spittoon, Resttintenbehälter
C4713-60017 'Spittoon' Assembly - Contains Absorbers Which Hold Excess Ink From Cartridges (Mounts on Right Side of Plotter)

C6070A Optio l Stand Kit - Includes Legs, Casters, Brace and Wire Form Paper Deflector - for E/A0 Size DesignJets

Strip, Encoder
C4704-40070 Capping strips - Two strips that s p together on the ends of the bin arms
C4714-60098 Encoder Strip Assembly - Connects from Left to Right Side of Plotter - Includes Encoder Strip and Encoder Strip Spring

C3190-40021 Bail Gear Support - the Mount for the Bail Lift Cam Gear and the Bail Lift Engaging Gear (P/O the Bail Gear Assembly)
C4713-40016 Bail engaging lever support - Mounted over the left end of the drive roller - Bail engaging lever s ps into this item
C4714-60147 Media Bin Support - Supports Media Bin Arms

C4713-40022 Right Trim - Mounted to Right of Entry Platen
C4713-40023 Left Trim - Mounted to Left of Entry Platen


HP DesignJet 488 C6083A Ersatzteile


Hier finden Sie uns, Lageplan
Drucker Service Arfert und Loose GbR
Bahrenfelder Chaussee 101
22761 Hamburg

Mail: info@edvdrucker.de
Tel: 040 / 57 50 35
Fax: 040 / 57 70 64
Montag bis Freitag von 8.00 bis 18.00 Uhr

Drucker Service Arfert und Loose GbR, Bahrenfelder Chaussee 101, 22761 Hamburg
© Copyright 1999 Arfert und Loose GbR. Alle Rechte vorbehalten

Drucker Service Arfert und Loose GbR

Tel: 040 / 57 50 35

Fax: 040 / 57 70 64

Drucker und HP DesignJet Plotter Dienstleistungen

Brother, Canon, Epson, Fujitsu, HP, Kyocera, Lexmark, Minolta, NEC, Oki, Philips, QMS, Samsung, Seikosha, Siemens, usw.