Cartridge
5183-5283  Return kit - For returning defective large format printer ink systems - Includes box and instructions    

Cleaning Supplies
C6247A DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags       

Hardware Kit
C4704-60095  Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips,   
C7769-60405  Hardware kit - Includes various screws and nuts for the stand and touch screen assembly,   
C7770-60018  Hardware kit for printer stand - Includes screwdriver and screws,   

Maintenance Kit
C7769-60394  Maintenance Kit - Contains lubricant, gloves, cotton wipe, spring tensioner, foams, tubes, belt, encoder strip, setup pens, trailing cable, service station, cutter, and carriage - For use with the 24-inch DesignJet 500/800 plotters
C7770-60287  Preventive Maintenance Kit - Includes idler pulley, spring tensioner, carriage base, service station, cutter assembly, setup pen assembly, belt, encoder strip and RIDs assembly - For use with the 42-inch Designjet 500/800 plotters

Recovery Kit
5183-5268  Ink system return kit (box and instructions) - For returning Scitex Latex printheads
5183-5269  Ink system return kit (box and instructions) - For returning Scitex Latex ink cartridges
5184-2833  Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions

Upgrade Kit  
C4718A Color upgrade kit - Includes ink cartridges, firmware SIMM, driver software, carriage label, front panel overlay, and instructions - Adds color capabilities to the DesignJet 430    

Belt
C4705-60082  Carriage belt (D-size) - Long/wide belt attached to the carriage, 
C4706-60082  Carriage belt (E-size) - Long/wide belt attached to the carriage, 
C7769-60182  Carriage belt - 24-inch, 
C7769-60392  Carriage belt - 24-inch,   
C7770-60014  Carriage Belt - 42-inch, 
 
Bracket/Guide
C7769-60409  Bracket kit - Includes the left cutter guide bracket and left encoder holder,  
 
Bushing  
C7769-60169  Cutter bushing,   

Cable
C4713-60181  Carriage assembly trailing cable (D-size) - Has 60-pin (F) connectors - 1.6m (5.2ft) long,   

Cable Kit  
C7769-60305  Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, two mounting clips, and a ferrite - Cables are 1.4m (4.7ft) long with 30 pin (M) edge connectors - For use with 24-inch plotters,   
C7770-60274  Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, mounting clips, and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models,   
 
Carriage
C4713-69039  Pen carriage assembly - Includes PC board, line sensor, carriage height gauge, carriage bushings and instructions
C7769-69376  Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor
 
Cover
C4713-40038  Carriage top cover    
C4713-40053  Carriage ink cartridge slot cover    
C7769-60406  Cover kit for drive roller encoder sensor       
 
Cutter  
C4713-60040  Cutter assembly - Mounts on carriage slide rod to the right of the carriage    
C7769-60390  Cutter assembly       
 
Guide  
C7769-60179  Cutter guide - Guide bar for the cutter assembly - For 24-inch plotters       
C7770-60322  Cutter guide - Guide bar for the cutter assembly - For 42-inch plotters       
 
Motor
C4713-60092  Carriage motor assembly - Includes cable    
C7769-60375  Carriage (scan-axis) motor assembly - Includes cable       
 
Strip  
C4713-60098  Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring       
C4714-60098  Encoder strip assembly (E-size) - Includes encoder strip and encoder strip spring       
C6069-40001  Capping strips (D-size) - Two strips s p together on the ends of the bin arms - Package contains two strips
                            
C7769-60183  Encoder strip (24-inch)       
C7770-60013  Encoder strip - For use with 42-inch plotters       
 
Keycap
C4713-40046  Power switch button/keycap    
 
Module
C4713-69203  Electronics module - Contains power supply, main logic board, interface connectors, and fan       
C7779-60263  Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan       
C7779-69263  Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan       

PC Board
C7769-60385  Interconnect PC board - Installed in right-side of printer       
C7769-69441  HP-GL/2 and RTL formatter PC board
C7769-69441 is no longer supplied. Please order the replacement, CH336-67001      
Q1277-60001  Power supply/motor driver board       
Q6713-60001  Main elelectronics board - For the Designjet 820MFP/T1100MFP/T1200MFP/T1200MFP HD printer series and the Designjet 4520/4500 scanner series       

PC Board (Interface)  
Q1277-60004  Interface board       
 
Power Supply  
C7769-60387  Power supply assembly - Includes power switch       
 
Power Module
0950-3358  Power module (Wall mount, MEI-AH ED12063) - Input voltage 240VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Australia and New Zealand)       

Control Panel 
C7769-60382  Control panel assembly - Includes ribbon cable       
 
Cover
C4713-00011  SIMM plate cover       
C4713-40029  Left end cover    
C4713-40042  Primer cover    
C4713-60014  Top cover assembly (D-size)    
C4713-60030  Right end cover    
C4713-60097  Back cover assembly (D-size)    
C4714-60014  Top cover assembly (E-size)    
C4714-60097  Back cover assembly (E-size)    
C7769-60154  Top cover assembly (Gray) - For the 24-inch Designjet 500 printer series       
C7769-60159  Right side cover (Gray) - For the Designjet 500 printer series only       
C7769-60413  Left end cover and EIO cover - White plastic cover on left side       
C7770-60154  Top cover assembly (Gray) - For the 42-inch Designjet 500 printer series       
C7779-60159  Right side cover (Black) - For the Designjet 800 printer series only       
C7779-60267  Left end cover and EIO cover - Black in color for use on Model 800       
C7780-60154  Top cover assembly (Black) - For the 42-inch Designjet 800 printer series       
 
Front Panel  
C4713-60091  Front panel assembly - Complete    
 
PC Board  
CQ654-67008  Panel PC board - Composed of the LCD controller, touch screen, and inverter board       
 
Memory (DIMM)  
1818-8505  64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module    
C7779-60269  64MB SO-DIMM memory module - Can be installed ONLY into the formatter board       
C7779-60270  128MB SO-DIMM memory module - Can be installed ONLY into the formatter board       
 
Memory (SIMM)  
1818-5624  4MB, 70nS DRAM SIMM memory module    
D2297-69001  16MB, 70nS, 36-bit SIMM memory module    
D2975-69001  8MB, 70nS, 36-bit parity SIMM memory module    
D3577-69001  8MB, 70nS, 36-bit parity SIMM memory module    
D3578-69001  32MB, 70nS, 36-bit parity SIMM memory module       

Cartridge  
51640-30001  HP 40 Black Inkjet Print Cartridge - Has ink level indicator - Prints approximately 1120 pages based on 5% density on a 8-inch by 10-inch print area (USA) NO LONGER SUPPLIED
51640A  HP 40 Black Inkjet Print Cartridge - Has ink level indicator - Prints approximately 1120 pages based on 5% density on a 8-inch by 10-inch print area (USA) Part 51640A is no longer supplied. Please order the replacement, 51640AE
51644C  HP 44 Cyan Inkjet Print Cartridge (USA) Part 51644C is no longer supplied. Please order the replacement, 51644CE
51644M  HP 44 Magenta Inkjet Print Cartridge (USA) Part 51644M is no longer supplied. Please order the replacement, 51644ME
51644Y  HP 44 Yellow Inkjet Print Cartridge (USA) Part 51644Y is no longer supplied. Please order the replacement, 51644YE
C4844-60053  HP 10 High Capacity Black Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) Part C4844-60053 is no longer supplied. Please order the replacement, C4844AE
C4844A  HP 10 High Capacity Black Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) Part C4844A is no longer supplied. Please order the replacement, C4844AE
C4911-61002  HP 82 High Capacity Cyan Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) Part C4911-61002 is no longer supplied. Please order the replacement, C4911A
C4911A  No. 82 standard capacity Cyan ink cartridge (69ml ink)
C4912-61003  HP 82 High Capacity Magenta Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) Part C4912-61003 is no longer supplied. Please order the replacement, C4912A
C4912A  HP 82 High Capacity Magenta Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA)
C4913-61003  HP 82 High Capacity Yellow Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) Part C4913-61003 is no longer supplied. Please order the replacement, C4913A
C4913A  HP 82 High Capacity Yellow Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA)       

Printhead
C4810A  HP 11 Black Printhead
C4811A  HP 11 Cyan Printhead
C4812A  HP 11 Magenta Printhead
C4813A  HP 11 Yellow Printhead
C7769-60164  Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads       
 
Vellum  
C3861A  Vellum - 91.4cm (36in) x 45.7m (150ft) roll
C3862A  HP Vellum Paper - 61cm (24in) x 45.7m (150ft) roll

Vinyl (Adhesive)  
C6775A  Colorfast adhesive vinyl (328 gsm) - 91.4cm (36in) x 12.2m (40ft) roll - For regular ink or UV-resistant ink
C6777A  Colorfast adhesive vinyl (328 gsm) - 137.2cm (54in) x 12.2m (40ft) roll - For regular ink or UV-resistant ink

Bail
C4713-60093  Bail assembly (D-size) - Has star wheel assemblies attached    
C4714-60093  Bail assembly (E-size) - Has star wheel assemblies attached    
 
Bracket  
C1633-40038  Left bail bracket    
C4713-40017  Right encoder bracket - Holds right end of encoder strip    
C7769-60391  Service station bracket - Installed on right-side of service station       

Bushing  
C1633-40082  Pincharm spring retaining bushing       
 
Cable  
C4713-60182  Flexible stranded wire cable - 12.5cm (4.9in) long    
 
Cable Kit  
C7769-60298  Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long       
C7770-60267  Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 2.0m (6.5ft) long       

Cam
C2847-20005  Pinch arm bar cam (D-size) - Long rod from left to right side of printer - Used to lift the pinch arms       
C3190-40020  Bail lift cam - Mounted behind the bail engaging lever support    

Clutch  
C4713-60129  Overdrive clutch assembly - Small, wide gear near overdrive gear - Held in place with a retaining E-ring 

Deflector  
C4713-60117  Media deflector with media button - The media deflector furthest to the right side - Includes media load button
C7769-60283  Media deflector kit - Kit includes three deflectors       

End Cap  
C3174-40011  Spindle end cap (2-inch)       
 
Extension  
C4713-60038  Media extension kit - Includes three extensions       
 
Fan  
C7769-60407  Vacuum fan assembly       

Gear  
C1633-40019  Overdrive gear cluster       
C1633-40027  Bail engaging lever gear    
C3190-40019  Bail lift cam gear    
 
Gear Assembly  
C7769-60408  Paper drive transmission gear kit - Includes two gears used to drive the paper drive roller       
 
Guide  
C4713-60184  Rollfeed guide kit - Left and right guides mounted under printer - Used to attach rollfeed housings to the printer
                            
C7770-60290  Tube guide - Black plastic guide that ink tube system sits in - For use with 42-inch plotters       
 
Handle  
C4713-40025  Pinchwheel manual lift handle - Paper loading lever    
 
Hub  
C6071-60172  Spindle hub kit (Small size) - Includes two small hubs and installation guide - (for Chi  ONLY)    
 
Ink Tubes Assembly  
C7769-60381  Ink tubes assembly - Includes 4 ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and 4 setup pens - For the 24-inch Designjet 500/800 printer series       
C7770-60286  Ink tubes assembly - Includes four ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and four setup pens - For use with the 42-inch Designjet 500/800 printer series

Lever  
C4713-60116  Right cam jour l assembly - Two levers and a metal rod    
 
Lifter  
C7769-60181  Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pincharm lever, pincharm lever bushing
C7770-60015  Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pinch arm lever, pinch arm lever bushing

Motor  
C7769-60377  Paper axis motor assembly - Includes cables       

Mount Kit  
C7769-60380  Rollfeed mount kit - Includes left and right housing       
 
Pincharm  
C4699-60081  Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing
C7769-60175  Pincharm assembly with wheels       
 
Platen  
C4713-60114  Entry platen assembly (D-size) - Curved cover/guide that is next to the paper drive (platen) roller    
C4714-60114  Entry platen assembly (E-size) - Curved cover/guide that is next to the paper drive (platen) roller    
C7769-60174  Front platen kit - Includes platens for both the 24-inch and the 42-inch models       
C7769-60410  Back platen assembly - Curved cover/guide that is installed below the paper drive roller - 24-inch plotters
C7770-60303  Back platen assembly - Curved cover/guide that is installed below the paper drive roller - 42-inch plotters
 
Primer  
C4713-60023  Primer assembly - Mounted on left side of plotter    
 
Pulley  
C3190-60132  Idler pulley - For main drive belt - On left end of plotter - Includes pulley, shaft and spacer       
 
Roller  
C4699-60042  Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder       
C4700-60042  Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder       
C4713-60115  Overdrive roller assembly (D-size) - Includes overdrive shaft with rollers, overdrive housing, media deflector without media button, and media deflector with media button    
C4714-60115  Overdrive roller assembly (E-size) - Includes overdrive shaft with rollers, overdrive housing, 2 media deflectors without media button, and media deflector with media button    
C7769-60412  Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters,   
C7770-60289  Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 42-inch plotters,   
 
Rollfeed Assembly  
C4704-60199  Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs
C4714-60146  E/A0 rollfeed kit - Includes left and right housing, hubs, spindle, end caps, screwdriver, and screws       
C4717A  D/A1 rollfeed kit - Includes left and right housing, hubs, spindle, end caps, screwdriver, and screws    
 
Sensor  
C4713-60034  Pincharm sensor assembly    
C7769-60378  Pincharm sensor - Installed in right front of print chassis       
C7769-60379  Media sensor - Installed in the front of the rear platen       
C7769-60384  Drive roller encoder sensor       
 
Service Station  
C3190-60142  Service station assembly       
C7769-60374  Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer,  
 
Spindle  
C4717-60005 D/A1 rollfeed spindle rod assembly - Includes spindle and hubs       
C4719-60005  E/A0 rollfeed spindle rod assembly - Includes spindle, hubs, and end caps       
 
Spindle Kit  
C2389A  24-inch rollfeed spindle rod assembly for DesignJet 500/510/800 series - Includes spindle, hubs, and end caps Part C2389A is no longer supplied. Please order the replacement, C7769-60242   
C6238A  D/A1 rollfeed spindle rod assembly for DesignJet 4xx Series - Includes spindle, hubs, and end caps       
C6239A  E/A0 rollfeed spindle rod assembly for DesignJet 4xx Series - Includes spindle, hubs, and end caps       
C7769-60242  24-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps       
C7769-60243  42-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps       
 
Spittoon  
C4713-60017  Spittoon assembly - Contains absorbers which hold excess ink from cartridges    
C7769-60165  Left spittoon assembly - Contains absorbers which hold excess ink from printheads       

Starwheel  
C4713-60035  Starwheel mount assembly - Includes cover, body, spring and two starwheels    
 
Strip  
C4704-40070  Capping strips ( E-size) - Two strips that s p together on the ends of the bin arms       
 
Tensioner  
C7769-60176  Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket       
C7769-60393  Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket    
 
Bin
C4713-60147  Media bin arm (Loop assembly)       
C7780-60002  Media bin (Graphite gray) - Plastic tray that mounts to the printer stand legs Part C7780-60002 is no longer supplied. Please order the replacement, CH337-67003   
C7781-60007  Media bin (Flint gray) - Plastic tray that mounts to the printer stand legs - For 24-inch plotters Part C7781-60007 is no longer supplied. Please order the replacement, CH336-67013   
 
Brace  
C7769-60219  Foot brace assembly - For use with 24-inch plotters       
C7770-60031  Foot brace assembly - For use with 42-inch plotters Part C7770-60031 is no longer supplied. Please order the replacement, CH337-67003   
 
Cross-Brace  
C4704-60077  Cross-brace (E-size) - Brace that connects and supports the two stand legs       
C6069-60002  Cross-brace (D-size) - Brace that connects and supports the two stand legs       
C7781-60004  Cross-brace - Brace that connects and supports the two stand legs - For use with 24-inch plotters Part C7781-60004 is no longer supplied. Please order the replacement, CH336-67013   
 
Foot  
C4704-60086  Foot assembly (includes casters) - Mounts to the bottom of the plotter stand legs (two used)       
C7769-60411  Foot kit - Contains four rubber feet for bottom of plotter - For the DesignJet 500/510/800 printer serie Part C7769-60411 is no longer supplied. Please order the replacement, CH336-67013   
C7770-60022  Foot assembly (includes casters) - Mounts to the bottom of the left and right printer stand legs (two used)
 
Leg  
C4704-60075  Leg assembly - Side support for the plotter - Does NOT include the foot assembly       
C7770-60021  Leg assembly - Side support for the printer - Does NOT include the foot assembly       
 
Stand  
C6069A  HP DesignJet Stand (D/A1) - Includes legs, casters, brace, wire form paper deflector, and media bin - For D/A1 size DesignJets    
C6070A  HP DesignJet Stand (D/A1) - Includes legs, casters, brace, wire form paper deflector, and media bin - For E/A0 size DesignJets       
CH337-67003  Stand assembly - For use with 42-inch plotters

HP DesignJet 820 MFP Q6685AR Plotter Ersatzteile

 

Hier finden Sie uns, Lageplan
Drucker Service Arfert und Loose GbR
Bahrenfelder Chaussee 101
22761 Hamburg

Mail: info@edvdrucker.de
Tel: 040 / 57 50 35
Fax: 040 / 57 70 64
Montag bis Freitag von 8.00 bis 18.00 Uhr

Drucker Service Arfert und Loose GbR, Bahrenfelder Chaussee 101, 22761 Hamburg
© Copyright 1999 Arfert und Loose GbR. Alle Rechte vorbehalten

Drucker Service Arfert und Loose GbR

Tel: 040 / 57 50 35

Fax: 040 / 57 70 64

Drucker und HP DesignJet Plotter Dienstleistungen

Brother, Canon, Epson, Fujitsu, HP, Kyocera, Lexmark, Minolta, NEC, Oki, Philips, QMS, Samsung, Seikosha, Siemens, usw.