Cartridge
5183-5283 Return kit - For returning defective large format printer ink systems - Includes box and instructions
Cleaning Supplies
C6247A DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags
Hardware Kit
C4704-60095 Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips
C7769-60405 Hardware kit - Includes various screws and nuts for the stand and touch screen assembly
C7770-60018 Hardware kit for printer stand - Includes screwdriver and screws
Maintenance Kit
C7769-60394 Maintenance Kit - Contains lubricant, gloves, cotton wipe, spring tensioner, foams, tubes, belt, encoder strip,
setup pens, trailing cable, service station, cutter, and carriage - For use with the 24-inch DesignJet 500/800 Plotters
C7770-60287 Preventive Maintenance Kit - Includes idler pulley, spring tensioner, carriage base, service station, cutter, setup assembly, belt, encoder strip and RIDs assembly - For use with the 42-inch Designjet 500/800 plotters
Nameplate/Logo
C4713-00013 meplate - DesignJet 430 logo
Recovery Kit
5183-5268 Ink system return kit (box and instructions) - For returning Scitex Latex printheads
5183-5269 Ink system return kit (box and instructions) - For returning Scitex Latex ink cartridges
5184-2833 Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
Upgrade Kit
C4718A Color upgrade kit - Includes ink cartridges, firmware SIMM, driver software, carriage label, front panel overlay, and instructions - Adds color capabilities to the DesignJet 430
Belt
C4705-60082 Carriage belt (D-size) - Long/wide belt attached to the carriage
C4706-60082 Carriage belt (E-size) - Long/wide belt attached to the carriage
C7769-60182 Carriage belt - Drives the carriage assembly - For use with 24-inch plotters
C7769-60392 Carriage belt (24-inch)
C7770-60014 Carriage Belt - Drives the carriage assembly - For use with 42-inch plotters
Bracket/Guide
C7769-60409 Bracket kit - Includes the left cutter guide bracket and left encoder holder
Bushing
C7769-60169 Cutter bushing
Cable
C4713-60181 Carriage assembly trailing cable (D-size) - Has 60-pin (F) connectors - 1.6m (5.2ft) long
Cable Kit
C7769-60305 Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, two mounting clips, and a ferrite - Cables are 1.4m (4.7ft) long with 30 pin (M) edge connectors - For use with 24-inch plotters,
C7770-60274 Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, mounting clips, and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models
Carriage
C4713-69039 Pen carriage assembly - Includes PC board, line sensor, carriage height gauge, carriage bushings and instructions
C7769-69376 Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor
Cover
C4713-40038 Carriage top cover
C4713-40053 Carriage ink cartridge slot cover
C7769-60406 Cover kit for drive roller encoder sensor
Cutter
C4713-60040 Cutter assembly - Mounts on carriage slide rod to the right of the carriage
C7769-60390 Cutter assembly
Guide
C7769-60179 Cutter guide - Guide bar for the cutter assembly - For 24-inch plotters
C7770-60322 Cutter guide - Guide bar for the cutter assembly - For 42-inch plotters
Label
C3178-00030 Carriage label - Shows ink cartridge location
C4713-00042 Carriage label - Shows ink cartridge location
Motor
C4713-60092 Carriage motor assembly - Includes cable
C7769-60375 Carriage (scan-axis) motor assembly - Includes cable
Strip
C4713-60098 Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring
C4714-60098 Encoder strip assembly (E-size) - Includes encoder strip and encoder strip spring
C6069-40001 Capping strips (D-size) - Two strips s p together on the ends of the bin arms - Package contains two strips
C7769-60183 Encoder strip (24-inch)
C7770-60013 Encoder strip - For use with 42-inch plotters
Keycap
C4713-40046 Power switch button/keycap
Module
C4713-69203 Electronics module - Contains power supply, main logic board, interface connectors, and fan
C7779-60263 Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan
C7779-69263 Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan
J3265-69001 Exter l JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
PC Board
C7769-60385 Interconnect PC board - Installed in right-side of printer
C7769-69441 HP-GL/2 and RTL formatter PC board Part C7769-69441 is no longer supplied. Please order the replacement, CH336-67001
Q1277-60001 Power supply/motor driver board
Q6713-60001 Main elelectronics board - For the Designjet 820MFP/T1100MFP/T1200MFP/T1200MFP HD printer series and the Designjet 4520/4500 scanner series
PC Board (Interface)
J4167-69001 JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors
Q1277-60004 Interface board
Power Supply
C7769-60387 Power supply assembly - Includes power switch
Control Panel
C7769-60382 Control panel assembly - Includes ribbon cable
Cover
C4713-00011 SIMM plate cover
C4713-40029 Left end cover
C4713-40042 Primer cover
C4713-60014 Top cover assembly (D-size)
C4713-60030 Right end cover
C4713-60097 Back cover assembly (D-size)
C4714-60014 Top cover assembly (E-size)
C4714-60097 Back cover assembly (E-size)
C7769-60154 Top cover assembly (Gray) - For the 24-inch Designjet 500 printer series
C7769-60159 Right side cover (Gray) - For the Designjet 500 printer series only
C7769-60413 Left end cover and EIO cover - White plastic cover on left side
C7770-60154 Top cover assembly (Gray) - For the 42-inch Designjet 500 printer series
C7779-60159 Right side cover (Black) - For the Designjet 800 printer series only
C7779-60267 Left end cover and EIO cover - Black in color for use on Model 800
C7780-60154 Top cover assembly (Black) - For the 42-inch Designjet 800 printer series
Front Panel
C4713-60091 Front panel assembly - Complete
PC Board
CQ654-67008 Panel PC board - Composed of the LCD controller, touch screen, and inverter board
Memory (DIMM)
1818-8505 64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module
C7779-60269 64MB SO-DIMM memory module - Can be installed ONLY into the formatter board
C7779-60270 128MB SO-DIMM memory module - Can be installed ONLY into the formatter board
Memory (SIMM)
1818-5624 4MB, 70nS DRAM SIMM memory module
D2297-69001 16MB, 70nS, 36-bit SIMM memory module
D2975-69001 8MB, 70nS, 36-bit parity SIMM memory module
D3577-69001 8MB, 70nS, 36-bit parity SIMM memory module
D3578-69001 32MB, 70nS, 36-bit parity SIMM memory module
Printhead
C4810A HP 11 Black Printhead
C4811A HP 11 Cyan Printhead
C4812A HP 11 Magenta Printhead
C4813A HP 11 Yellow Printhead
C7769-60164 Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads
Bail
C4713-60093 Bail assembly (D-size) - Has star wheel assemblies attached
C4714-60093 Bail assembly (E-size) - Has star wheel assemblies attached
Bracket
C1633-40038 Left bail bracket
C4713-40017 Right encoder bracket - Holds right end of encoder strip
C7769-60391 Service station bracket - Installed on right-side of service station
Bushing
C1633-40082 Pincharm spring retaining bushing
Cable
C4713-60182 Flexible stranded wire cable - 12.5cm (4.9in) long
Cable (Interface)
C2951A IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long Part C2951A is no longer supplied. Please order the replacement, 5063-1257
Cable Kit
C7769-60298 Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long
C7770-60267 Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 2.0m (6.5ft) long
Cam
C2847-20005 Pinch arm bar cam (D-size) - Long rod from left to right side of printer - Used to lift the pinch arms
C3190-40020 Bail lift cam - Mounted behind the bail engaging lever support
Clutch
C4713-60129 Overdrive clutch assembly - Small, wide gear near overdrive gear - Held in place with a retaining E-ring
Deflector
C4713-60117 Media deflector with media button - The media deflector furthest to the right side - Includes media load button
C7769-60283 Media deflector kit - Kit includes three deflectors
End Cap
C3174-40011 Spindle end cap (2-inch)
Extension
C4713-60038 Media extension kit - Includes three extensions
Fan
C7769-60407 Vacuum fan assembly
Gear
C1633-40019 Overdrive gear cluster
C1633-40027 Bail engaging lever gear
C3190-40019 Bail lift cam gear
Gear Assembly
C7769-60408 Paper drive transmission gear kit - Includes two gears used to drive the paper drive roller
Guide
C4713-60184 Rollfeed guide kit - Left and right guides mounted under printer - Used to attach rollfeed housings to the printer
C7770-60290 Tube guide - Black plastic guide that ink tube system sits in - For use with 42-inch plotters
Handle
C4713-40025 Pinchwheel manual lift handle - Paper loading lever
Hub
C6071-60172 Spindle hub kit (Small size) - Includes two small hubs and installation guide - (for Chi ONLY)
Ink Tubes Assembly
C7769-60381 Ink tubes assembly - Includes 4 ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and 4 setup pens - For the 24-inch Designjet 500/800 printer series
C7770-60286 Ink tubes assembly - Includes four ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and four setup pens - For use with the 42-inch Designjet 500/800 printer series
Lever
C4713-60116 Right cam jour l assembly - Two levers and a metal rod
Lifter
C7769-60181 Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pincharm lever, pincharm lever bushing
C7770-60015 Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pinch arm lever, pinch arm lever bushing
Motor
C7769-60377 Paper axis motor assembly - Includes cables
Mount Kit
C7769-60380 Rollfeed mount kit - Includes left and right housing
Pincharm
C4699-60081 Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing
C7769-60175 Pincharm assembly with wheels
Platen
C4713-60114 Entry platen assembly (D-size) - Curved cover/guide that is next to the paper drive (platen) roller
C4714-60114 Entry platen assembly (E-size) - Curved cover/guide that is next to the paper drive (platen) roller
C7769-60174 Front platen kit - Includes platens for both the 24-inch and the 42-inch models
C7769-60410 Back platen assembly - Curved cover/guide that is installed below the paper drive roller -24-inch plotters,
C7770-60303 Back platen assembly - Curved cover/guide that is installed below the paper drive roller -42-inch plotters
Primer
C4713-60023 Primer assembly - Mounted on left side of plotter
Pulley
C3190-60132 Idler pulley - For main drive belt - On left end of plotter - Includes pulley, shaft and spacer
Roller
C4699-60042 Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
C4700-60042 Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
C4713-60115 Overdrive roller assembly (D-size) - Includes overdrive shaft with rollers, overdrive housing, media deflector without media button, and media deflector with media button
C4714-60115 Overdrive roller assembly (E-size) - Includes overdrive shaft with rollers, overdrive housing, 2 media deflectors without media button, and media deflector with media button
C7769-60412 Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters
C7770-60289 Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 42-inch plotters
Rollfeed Assembly
C4704-60199 Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs
C4714-60146 E/A0 rollfeed kit - Includes left and right housing, hubs, spindle, end caps, screwdriver, and screws
C4717A D/A1 rollfeed kit - Includes left and right housing, hubs, spindle, end caps, screwdriver, and screws
Sensor
C4713-60034 Pincharm sensor assembly
C7769-60378 Pincharm sensor - Installed in right front of print chassis
C7769-60379 Media sensor - Installed in the front of the rear platen
C7769-60384 Drive roller encoder sensor
Service Station
C3190-60142 Service station assembly
C7769-60374 Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer,
Spindle
C4717-60005 D/A1 rollfeed spindle rod assembly - Includes spindle and hubs
C4719-60005 E/A0 rollfeed spindle rod assembly - Includes spindle, hubs, and end caps
Spindle Kit
C2389A 24-inch rollfeed spindle rod assembly for DesignJet 500/510/800 series - Includes spindle, hubs, and end caps Part C2389A is no longer supplied. Please order the replacement, C7769-60242
C6238A D/A1 rollfeed spindle rod assembly for DesignJet 4xx Series - Includes spindle, hubs, and end caps
C6239A E/A0 rollfeed spindle rod assembly for DesignJet 4xx Series - Includes spindle, hubs, and end caps
C7769-60242 24-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps
C7769-60243 42-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps
Spittoon
C4713-60017 Spittoon assembly - Contains absorbers which hold excess ink from cartridges
C7769-60165 Left spittoon assembly - Contains absorbers which hold excess ink from printheads
Spring
07575-80012 Bail gear support 'claw' spring - Attached between the bail engaging lever support and the bail gear assembly
C1633-80005 Compression spring - Installed between pincharm assembly and bushing
C3190-80013 Bail cable spring
C4713-80003 Pincharm spring
Starwheel
C4713-60035 Starwheel mount assembly - Includes cover, body, spring and two starwheels
Strip
C4704-40070 Capping strips ( E-size) - Two strips that s p together on the ends of the bin arms
Support
C3190-40021 Bail gear support
C4714-60147 Media bin support (E-size)
Tensioner
C7769-60176 Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket
C7769-60393 Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket
Bin
C4713-60147 Media bin arm (Loop assembly)
C7780-60002 Media bin (Graphite gray) - Plastic tray that mounts to the printer stand legs Part C7780-60002 is no longer supplied. Please order the replacement, CH337-67003
C7781-60007 Media bin (Flint gray) - Plastic tray that mounts to the printer stand legs - For 24-inch plotters Part C7781-60007 is no longer supplied. Please order the replacement, CH336-67013,
Brace
C7769-60219 Foot brace assembly - For use with 24-inch plotters
C7770-60031 Foot brace assembly - For use with 42-inch plottersn Part C7770-60031 is no longer supplied. Please order the replacement, CH337-67003
Cross-Brace
C4704-60077 Cross-brace (E-size) - Brace that connects and supports the two stand legs
C6069-60002 Cross-brace (D-size) - Brace that connects and supports the two stand legs
C7781-60004 Cross-brace - Brace that connects and supports the two stand legs - For use with 24-inch plotters Part C7781-60004 is no longer supplied. Please order the replacement, CH336-67013
Foot
C4704-60086 Foot assembly (includes casters) - Mounts to the bottom of the plotter stand legs (two used)
C7769-60411 Foot kit - Contains four rubber feet for bottom of plotter - For the DesignJet 500/510/800 printer seriesPart C7769-60411 is no longer supplied. Please order the replacement, CH336-67013,
C7770-60022 Foot assembly (includes casters) - Mounts to the bottom of the left and right printer stand legs (two used)
Leg
C4704-60075 Leg assembly - Side support for the plotter - Does NOT include the foot assembly
C7770-60021 Leg assembly - Side support for the printer - Does NOT include the foot assembly
Stand
C6069A HP DesignJet Stand (D/A1) - Includes legs, casters, brace, wire form paper deflector, and media bin - For D/A1 size DesignJets
C6070A HP DesignJet Stand (D/A1) - Includes legs, casters, brace, wire form paper deflector, and media bin - For E/A0 size DesignJets
CH337-67003 Stand assembly - For use with 42-inch plotters
HP DesignJet 820 MFP Q6685A Plotter Ersatzteile