Absorber, Tinten-Filz   Ink Absorber - Part of Spittoon Assembly - Order Spittoon

Bail
C3190-60095 Bail Assembly - Includes Bail, Starwheels, and Brackets

Belt, Zahnriemen, Antriebsriemen C4705-60082 Carriage belt - Long/wide belt attached to the carriage

Bushing
C1633-40082 Bushing - Retains Spring on Shaft of Pincharm Assembly

Cable
C3180-60012 Cable - from Main Logic Board to Paper (X-Axis) Drive Motor
C4713-60181 Trailing Cable - from Electronics Module to Carriage Assy
C4713-60182 Bail Link (Cable) - Between the Bail Engaging Lever and the Bail Gear Assembly

Carriage, Schlitten, Wagen
C4699-60082 Carriage assembly - Includes carriage PC board

Control Panel, Bedienfeld
C3190-60144 Control panel assembly - Mounts in right side cover - Includes control panel, panel support, and cover sensor

Cover
C3190-60082 Rear Cover - has Cut-outs to Access SIMM Slot, Interface Connectors, and AC Receptacle
C4699-00015 SIMM Cover - Attaches to Rear Cover over Optio l SIMM Slot
C4699-40003 Cover - Lift up top cover
C4699-40004 Left End Cover - This is the Cover the  meplate attaches to
C4699-40005 Right End Cover - has Cut-outs to Access Control Panel Assy
C4713-40038 Carriage top cover

Cross-Brace
C3192-60001 Cross-brace - Main structure that extends between stand legs

Cutter
C4699-60078 Cutter assembly - Attaches to right side of rollfeed assy

End Cap
C3174-40011 Spindle End Cap - One used on Each End of Spindle Assembly

Fan, Lüfter See Description Cooling Fan is Part of the Electronics Module - Please Refer to Module

Firmware
C4699-60074 ROM SIMM (Rev A.01.06) - Plugs into main logic board slot

Foot
C4696-60006 Mounts to the Bottom of Left and Right Plotter Stand Legs (2 Used) - When replacing feet (new style) , you must order new style legs (C4696-60007)

Handle, Papier Hebel
C3190-40029 Handle - Right side of plotter - To load paper

Hardware Kit
C4704-60095 Hardware Kit - Used to Assemble Printer Stand - Includes Screw Driver, Screws, Washers and Media Bin Retaining Clips

Hinge
C3190-40041 Top Cover Hinge (3 Used)

Holder
C3190-40052 Holder - for Quick Reference Guide - on Right End Cover

Keycap
C3190-40045 Keycap - for Power Switch

Label
C3178-00030 Carriage label - Shows ink cartridge location
C4705-00017 Instruction Label - Mounts on Top of Left End Cover

Leg
C4696-60007 Leg Assembly - Side Support for the Plotter (2 Used) - Does NOT Include the Foot Assembly

Magazine See Description Cooling Fan is Part of the Electronics Module - Please Refer to Module

Memory (Product)
C3131A 2MB SIMM Memory Module Upgrade
C3132A 4MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)
C3133A 8MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)

Memory (SIMM)
C3131-67901 2MB SIMM Memory Module (C3131A)
C3132-67901 4MB Parity SIMM Memory Module - 70nS, 36 Bit (C3132A)
C3133-67901 8MB Parity SIMM Memory Module - 70nS, 36 Bit (C3133A)
C3146-67901 16MB SIMM memory module

Module, Netzteil, Mainboard
C4699-69039 Electronics module - Contains power supply, main logic board, interface connectors, and fan

Motor
C3190-60145 Carriage Motor Assembly - Includes Cable

Motor/Gear
C4699-60064 Paper (X-Axis) Drive Motor (Includes Helical Drive Gear) - Attaches to Right Side of Plotter Chassis - NOTE: Motor and Gear are Only Sold as an Assembly

Nameplate/Logo
C4699-00008  nameplate - Attaches to Front of Left Side Cover

PC Board, Netzteil, Mainboard See Description Power Supply and Main Logic PC Board are Part of the Electronics Module - Please Refer to Module

Packaging
C4713-60123 Repacking kit - Materials to repack plotter

Pincharm
C4699-60081 Pincharm Assembly - Curved Black Plastic Plate with 4 Small Rubber Rollers (Does NOT Include Spring or Bushing) (5 Used)

Power Module, Netzteil
0950-2372 Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts - For J2382/83A/B
0950-3170 Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 300mA - For Europe and Israel - For J2592A
0950-3349 Power Module - for JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B - 230V in Europe/Israel

Primer, Pumpe
C4699-60003 Primer assembly - Mounted on left side of plotter

Pulley, Umlenkrolle
C3190-60132 Idler Pulley - for Main Drive Belt - on Left End of Plotter - Includes Pully, Shaft and Spacer

Roller
C3190-60096 Overdrive Roller - Shaft W/Rollers - Runs Width of Plotter Includes Overdrive Housing
C4699-60042 Paper Drive (Platen) Roller Assy - Long Gear Driven Roller - Includes Roller and Mark Encoder (Attached to Left End)

Rollfeed Assy, Spindel Halterung
C3174-60013 Rollfeed assembly - E bles plotter to use rollfeed paper

Sensor
C3190-60140 Media Sensor Mech Assembly - Mounts to Right Side of the Entry Platen - Includes, Edge Measuring and Secondary Levers, Media Sensor and Holder

See Description Pincharm Sensor Switch - Not Available Separately - Order Spittoon Assembly

Service Station, Reinigngs-Station
C3190-60142 Service Station Assembly - Mounted Behind Primer Assembly on Left Side of Plotter Chassis

Spindle, Achse für PapierRollen
C3174-60005 Rollfeed Spindle Assembly - Includes End Caps

Spittoon, Resttintenbehälter
C4699-60002 'Spittoon' Assembly - Includes Pincharm Sensor Switch and Absorbers Which Hold Excess Ink From Cartridges (Mounts on Right Side of Plotter)

Spring
C1633-80005 Compression Spring - Goes Between Pincharm Assy and Bushing
C3190-80010 Belt Tensioner Spring - Mounted to Carriage Motor Assembly

Stand
C3192A Optio l Stand - Includes Legs, Casters and Brace (Does NOT Include the Paper Bin)

Strip
C4713-60098 Encoder Strip Assembly - Connects from Left to Right Side of Plotter - Includes Encoder Strip and Encoder Strip Spring

Upgrade Kit
C3176A Rollfeed Upgrade Kit - Includes Rollfeed Module & Stand Assy

HP DesignJet 330C C4699A Ersatzteile

 

Hier finden Sie uns, Lageplan
Drucker Service Arfert und Loose GbR
Bahrenfelder Chaussee 101
22761 Hamburg

Mail: info@edvdrucker.de
Tel: 040 / 57 50 35
Fax: 040 / 57 70 64
Montag bis Freitag von 8.00 bis 18.00 Uhr

Drucker Service Arfert und Loose GbR, Bahrenfelder Chaussee 101, 22761 Hamburg
© Copyright 1999 Arfert und Loose GbR. Alle Rechte vorbehalten

Drucker Service Arfert und Loose GbR

Tel: 040 / 57 50 35

Fax: 040 / 57 70 64

Drucker und HP DesignJet Plotter Dienstleistungen

Brother, Canon, Epson, Fujitsu, HP, Kyocera, Lexmark, Minolta, NEC, Oki, Philips, QMS, Samsung, Seikosha, Siemens, usw.