Absorber, Resttinten Filz   Ink Absorber - Part of Spittoon Assembly - Order Spittoon

Bail
C3196-60118 Bail assembly - Mounting strip assembly for the starwheel mount assemblies (Not included) - Extends width of plotter

Belt, Zahnriemen, Antriebsriemen
C4706-60082 Carriage belt - Long/wide belt attached to the carriage

Bin
C4706-60097 Media bin - Wire rack that mounts to the plotter stand legs and cross brace

Brake/Housing
C4704-60199 Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs

Bushing
C1633-40082 Bushing - Retains Spring on Shaft of Pincharm Assembly
C2858-40017 Rear slider rod bushing (Spring loaded) - Slides into the rear center of the carriage assembly

Cable, Kabel
C3195-60102 Cable - from Main Logic Board to Paper (X-Axis) Drive Motor
C3195-80009 Trailing Cable - from Carriage Assembly to Main Logic Board
C3196-60056 Power Cable - Connects from Power Supply to Main Logic Bd
C3196-60057 Ribbon Cable (Black) - From the Main Logic Board to the Drop Detect and Primer Assemblies (on Left Side of Plotter)

Cam
C1633-20012 Pincharm Bar Cam - Long Rod From Left to Right Side of Printer - Used to Lift the Pincharms

Carriage, Schlitten, Patronen Wagen
C4705-69113 Pen Carriage Assembly - Drafting 'Head' for the Plotter (Holds the One Black Ink Cartridge) REQUIRES RETURN OF DEFECTIVE PART(New part = C4705-60113)

Clamp
C3195-40026 Ribbon cable clamp (top half) - Secures the trailing cable to the top of the carriage assembly
C3195-40027 Ribbon cable clamp (bottom half) - Secures the trailing cable to the top of the carriage assembly

Cleaning Supplies
C6247A DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags

Cover
C1633-00031 MIO Slot Access Cover - Mounts Near the Center of the Main Cover/Panel on the Electronic Enclosure Assembly
C3195-00009 SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly
C3195-40047 Housing cover (L-shaped) - Right side cover (Cap) for the power switch housing (for enclosing the power switch)
C3196-60039 Cover assembly - Metal center cover that lift-up viewing window mounts to - Includes 'T' shaped latches and mounting screws
C3196-60053 Back cover/panel - Metal cover for the electronic enclosure assembly
C4705-60106 Left End Cover (Cover that the  meplate Mounts on)
C4705-60114 Right end cover - Has cut outs for the control panel buttons lights and display - Does NOT include an overlay
C4706-60084 Rollfeed access cover - Opens forward to allow access to paper spindle assembly - Includes cover and springs
C4706-60088 Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier

Cross-Brace
C3193-60001 Cross-brace - Main structure that extends between stand legs

Cutter, Messer
C2858-60021 Cutter mechanism assembly - Auto cutter for rollfeed paper

Enclosure
C3196-60029 Cutter Assy Enclosure Bar - Mounts to Left and Right Side Side Plates of Chassis (Mounting Bar for the Media Guides)

Encoder, Sensor
C2858-60010 Linear Encoder IC - Attaches to Right Side of Carriage Assy Detects Carriage Position as it Moves along Encoder Strip

End Cap, Spindel
C2858-40043 Spindle End Cap (Small) (or Core Spacer) - on the Left End of the Spindle Rod - Removes for Loading the Media Roll
C3172-40006 Spindle End Cap (Large) - on Right End of the Spindle Rod

Fan, Lüfter
C3190-60137 Fan Assembly - Located just above Power Supply Board inside of Electronic Enclosure Assembly

Firmware
C4705-60117 Code ROM SIMM (Revision R.01.12 firmware) - Plugs into socket on the main logic board

Foot
C4696-60006 Mounts to the Bottom of Left and Right Plotter Stand Legs (2 Used) - When replacing feet (new style) , you must order new style legs (C4696-60007)
 
Front Panel, Bedienfeld
C3195-60038 Front (Control) panel and cable assembly - Includes function buttons and display

Gear, Zahnrad
C1633-40019 Cluster Gear - Mounts to the Left Side Plate of the Plotter - Between the Paper Drive Roller Gear and the Overdrive Gear

Gear Assembly
C4705-60089 Clutch / Overdrive Gear Assembly - Mounts Above the Cluster Gear on the Left Side Plate of the Plotter - Includes Gear, Clutch, Retaining Clip and Two Washers

Guide
C3195-40045 Media Guide - Small Triangular Pieces that Mount to the Cutter Assembly Enclosure Bar

Hardware
0624-0771 Screw - Attaches 'T' Shaped Latches to Center Cover

Hardware Kit
C4704-60095 Hardware Kit - Used to Assemble Printer Stand - Includes Screw Driver, Screws, Washers and Media Bin Retaining Clips
 
Holder
C3195-40017 Carriage Motor Bracket (on Right Side of Plotter) - Carriage Drive Motor Mounts to the Bottom of this Bracket
C3195-40024 Cable holder (Small U-Shaped piece on top) - One of two pieces that hold the trailing cable to the main chassis
C3195-40025 Cable holder (Large piece on bottom) - One of two pieces that hold the trailing cable to the main chassis

Housing
C3180-40012 Switch housing (mount) - For protecting the power switch
C4704-60082 Housing Assembly (on Left Side) - Accepts the Left Side (End with Smaller End Cap) of the Paper Spindle Assembly
C4706-60092 Electronic Housing Assembly (PC Board Enclosure) - Mounts on Rear of Plotter
 
Keycap, Schalter Kappe
5041-1203 Power switch keycap (White)

Label
C3195-00057 Safety Label - Provides Warning that Encoder Strip is Sharp Should be Placed so it is Visible when Top Cover is Open

Latch
C3195-40060 Latch - Two 'T' Shaped Latches are Used to Connect Ends of Center Cover to Left and Right End Covers

Leg
C4696-60007 Leg Assembly - Side Support for the Plotter (2 Used) - Does NOT Include the Foot Assembly

Lift Assembly
C3195-60116 Pincharm lift assembly - Does NOT include pincharm bar cam - Includes pinchwheel manual lift handle, spring, sensor, rocker plate, cam drive, cam jour ls, wire linkages, nuts, screws, and washer

Maintenance Kit, Wartungs Kit
C3195-69166 Maintenance Kit - Includes service station (spittoon) assembly, carriage (Y-Axis) motor, encoder strip, and lubricating oil REQUIRES RETURN OF DEFECTIVE PART(New part = C3195-60166)

Memory (Product)
C3132A 4MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)
C3133A 8MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)
D2297A 16MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)
D3578A 32MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)
 
Memory (SIMM)
C3132-67901 4MB Parity SIMM Memory Module - 70nS, 36 Bit (C3132A)
C3133-67901 8MB Parity SIMM Memory Module - 70nS, 36 Bit (C3133A)
C3146-67901 16MB SIMM memory module
D2297-69001 16MB Parity SIMM Memory Module - 70nS, 36 Bit (D2297A) REQUIRES RETURN OF DEFECTIVE PART(New part = D2297-63001)
D2298-69001 32MB Parity SIMM Memory Module - 70nS, 36 Bit (D2298A) REQUIRES RETURN OF DEFECTIVE PART(New part = D3578-63001)
D3578-69001 32MB Parity SIMM Memory Module - 70nS, 36-Bit (D3578A) REQUIRES RETURN OF DEFECTIVE PART(New part = D3578-63001)

Motor
C3195-60009 Bail Stepper Motor - Mounts on Left Side Plate of Plotter - Used to Drive the Bail Assembly
C3195-60112 Carriage (Y-Axis) Drive Motor Assy - Includes Motor and Cable - Motor Mounts to the Bracket on Right Side of Plotter

Motor/Gear
C4705-60068 Paper (X-Axis) Drive Motor (Includes Helical Drive Gear) - Attaches to Right Side of Plotter Chassis - NOTE: Motor and Gear are Only Sold as a Set

Nameplate/Logo
C4705-00020 DesignJet 700  meplate - Mounts on Left End Cover
 
Overdrive Assy
C4706-60121 Overdrive Support Assembly - Mounts Between the Left and Right Side Plates of the Plotter
 
PC Board, Mainboard
C4705-69001 Main logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports REQUIRES RETURN OF DEFECTIVE PART(New part = C4705-60001)
 
Pincharm
C4705-60091 Pincharm Assembly - Curved Black Plastic Plate with 4 Small Rollers (6 Used) (Does NOT Include Spring or Bushing)

Platen, Walze
C3196-60173 Entry Platen Assembly - Cover/guide that is next to the paper drive (Platen) roller

PostScript
C3198-60151 PostScript SIMM - Plugs into Socket on the Main Logic Board
C4707A Adobe PostScript level 2 upgrade kit - Includes postscript ROM SIMM, Windows/Mac driver software and documentation

Power Module, Netzteil
0950-2372 Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts - For J2382/83A/B
0950-3170 Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 300mA - For Europe and Israel - For J2592A
 
Power Supply, Netzteil
0950-2623 Autoranging Power Supply - for all Countries (90V to 264V)

Primer, Pumpe
C4705-60109 Primer assembly - Mounts under the service station assembly on the left side of the plotter
 
Pulley, Umlenkrolle
C3195-60169 Idler pulley - Applies tension to the left end of the carriage belt

Roller
C4700-60042 Paper Drive (Platen) Roller Assy - Long Gear Driven Roller - Includes Roller and Mark Encoder (Attached to Left End)

Sensor
C2858-60007 Optical Primer Sensor - Mounts to Primer Assembly - Used to Determine Initial Position of the Primer Assembly Cam
C3190-60140 Media Sensor Mech Assembly - Mounts to Right Side of the Entry Platen - Includes, Edge Measuring and Secondary Levers, Media Sensor and Holder
C3195-60015 Sensor Assy (for Lift-Up Window) - on Right Side of Plotter
 
Service Station, Reinigungs Station
C3195-69165 Service station assembly - For conditioning the ink cartridges when the carriage is in its home position REQUIRES RETURN OF DEFECTIVE PART(New part = C3195-60165)

Shield
C3195-80005 RF Shield (Gasket) - Braided Shield With Adhesive Strip Attached to Electronic Housing (2 Used)
C4704-40050 SIMM Module Shield (Barrier) - Protective Metal Rectangular Housing - Surrounds SIMM Slots on the Main Logic Board

Spindle Kit, Achse für Rollen Papier
C2848-60011 Rollfeed Spindle Rod Assembly - Includes Spindle and End Caps
C3173-60003 Rollfeed Spindle Rod Assembly - Includes Spindle and End Caps - For Chi  Only
C3173A E/A0 Rollfeed Spindle Rod Assembly - Includes Spindle and End Caps

Spittoon, Resttintenbehälter
C3195-60027 'Spittoon' Assembly - Contains Absorbers Which Hold Excess Ink From Cartridges (Mounts on Right Side of Plotter)

Starwheel Mount
C4713-60035 Starwheel Mount Assembly (13 Used) - Includes: Cover, Body, Spring and Two Starwheels - Mounts on the Bail Assembly (Note: Part Number is for One Starwheel Mount Assembly ONLY)
 
Strip, Encoder
C4714-60098 Encoder Strip Assembly - Connects from Left to Right Side of Plotter - Includes Encoder Strip and Encoder Strip Spring

Switch, Schalter   Power Switch NOT Sold Separately - Order AC Wiring Harness
 
Wedge
C3195-40039 Pully Wedge - for Carriage (Y-Axis) Belt Tension

Window
C4706-60087 Lift-Up Viewing Window - on Top of Chassis
 
Wiring Harness, Kabel Baum
C3195-60149 AC Wiring Harness - Includes Power Switch, AC Receptacle, and Connector (that Plugs into Power Supply Board)

HP DesignJet 700 C4706A Plotter Ersatzteile

 

Hier finden Sie uns, Lageplan
Drucker Service Arfert und Loose GbR
Bahrenfelder Chaussee 101
22761 Hamburg

Mail: info@edvdrucker.de
Tel: 040 / 57 50 35
Fax: 040 / 57 70 64
Montag bis Freitag von 8.00 bis 18.00 Uhr

Drucker Service Arfert und Loose GbR, Bahrenfelder Chaussee 101, 22761 Hamburg
© Copyright 1999 Arfert und Loose GbR. Alle Rechte vorbehalten

Drucker Service Arfert und Loose GbR

Tel: 040 / 57 50 35

Fax: 040 / 57 70 64

Drucker und HP DesignJet Plotter Dienstleistungen

Brother, Canon, Epson, Fujitsu, HP, Kyocera, Lexmark, Minolta, NEC, Oki, Philips, QMS, Samsung, Seikosha, Siemens, usw.