Absorber Ink Absorber - Part of Spittoon Assembly - Order Spittoon

Bail
C3191-60095 Bail Assembly - Includes Bail, Starwheels, and Brackets

Belt, Antriebsriemen, Zahnriemen
C4706-60082 Carriage belt - Long/wide belt attached to the carriage

Bin
C4706-60097 Media bin - Wire rack that mounts to the plotter stand legs and cross brace

Bushing
C1633-40082 Bushing - Retains Spring on Shaft of Pincharm Assembly (7 Used)

Cable, kabel
C3180-60012 Cable - from Main Logic Board to Paper (X-Axis) Drive Motor
C4713-60182 Bail Link (Cable) - Between the Bail Engaging Lever and the Bail Gear Assembly
C4714-60181 Trailing Cable - from Electronics Module to Carriage Assy

Carriage, Schlitten, Wagen
C4694-60050 Carriage assembly - Includes carriage PC board

Caster
1492-0145 Lockable Caster Assembly - Includes Stem and Washer (4 Used)

Control Panel, Bedienfeld
C3180-60010 Control Panel - Mounts in Control Panel Support
C3190-60144 Control panel assembly - Mounts in right side cover - Includes control panel, panel support, and cover sensor

Cover
C3191-60082 Rear Cover - has Cut-outs to Access SIMM Slot, Interface Connectors, and AC Receptacle
C4694-40001 Primer Assembly Cover - Mounted on Top of Primer Assembly
C4694-40002 Carriage Top Cover - S ps in PlaceD
C4699-00015 SIMM Cover - Attaches to Rear Cover over Optio l SIMM Slot
C4699-40004 Left End Cover - This is the Cover the  meplate attaches to
C4699-40005 Right End Cover - has Cut-outs to Access Control Panel Assy
C4700-40003 Cover - Lift up top cover

Cross-Brace
C3193-60001 Cross-brace - Main structure that extends between stand legs

Fan, Lüfter See Description Cooling Fan is Part of the Electronics Module - Please Refer to Module

Firmware
C3190-60168 ROM SIMM (Rev A.01.06) - Plugs into main logic board slot

Foot
C4696-60006 Mounts to the Bottom of Left and Right Plotter Stand Legs (2 Used) - When replacing feet (new style) , you must order new style legs (C4696-60007)

Handle, Papier Hebel
C3190-40029 Handle - Right side of plotter - To load paper

Hardware Kit
C4704-60095 Hardware Kit - Used to Assemble Printer Stand - Includes Screw Driver, Screws, Washers and Media Bin Retaining Clips

Hinge
C3190-40041 Top Cover Hinge (3 Used)

Holder
C3190-40052 Holder - for Quick Reference Guide - on Right End Cover

Keycap, Schalter Kappe
C3190-40045 Keycap - for Power Switch

Label
C3195-00057 Safety Label - Provides Warning that Encoder Strip is Sharp Should be Placed so it is Visible when Top Cover is Open
C4705-00017 Instruction Label - Mounts on Top of Left End Cover

Leg
C4696-60007 Leg Assembly - Side Support for the Plotter (2 Used) - Does NOT Include the Foot Assembly

Magazine Cooling Fan is Part of the Electronics Module - Please Refer to Module

Memory (Product)
C2065A 4MB SIMM Memory Module Upgrade - 80nS, 36 Bit (One SIMM)
C2066A 8MB SIMM Memory Module Upgrade - 80nS, 36 Bit (One SIMM)
D2297A 16MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)
D3578A 32MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM)

Memory (SIMM)
D2152-69001 8MB SIMM Memory Module - 80nS, 36 Bit (C2066A) REQUIRES RETURN OF DEFECTIVE PART(New part = D2152-63001)
D2156-69001 4MB SIMM Memory Module - 80nS, 36 Bit (C2065A) REQUIRES RETURN OF DEFECTIVE PART(New part = D2156-63001)
D2297-69001 16MB Parity SIMM Memory Module - 70nS, 36 Bit (D2297A) REQUIRES RETURN OF DEFECTIVE PART(New part = D2297-63001)
D2298-69001 32MB Parity SIMM Memory Module - 70nS, 36 Bit (D2298A) REQUIRES RETURN OF DEFECTIVE PART(New part = D3578-63001)
D3578-69001 32MB Parity SIMM Memory Module - 70nS, 36-Bit (D3578A) REQUIRES RETURN OF DEFECTIVE PART(New part = D3578-63001)

Motor
C3190-60145 Carriage Motor Assembly - Includes Cable
C3190-60169 Media Motor/Encoder Assy - with Motor Power Cable

Nameplate/Logo
C4694-00001  meplate - Attaches to Front of Left Side Cover

PC Board, Netzteil, Mainboard Power Supply and Main Logic PC Board are Part of the Electronics Module - Please Refer to Module

Pincharm
C4699-60081 Pincharm Assembly - Curved Black Plastic Plate with 4 Small Rubber Rollers (Does NOT Include Spring or Bushing) (7 Used)

Power Supply, Netzteil
0950-2623 Power Supply Board and Sticker to Upgrade Power Supply Module for Serial Numbers Between ESA5900000 and ESA5A99999

Primer, Pumpe
C4699-60003 Primer assembly - Mounted on left side of plotter

Pulley, Umlenkrolle
C3190-60132 Idler Pulley - for Main Drive Belt - on Left End of Plotter - Includes Pully, Shaft and Spacer

Roller
C2859-60004 Paper Drive (Platen) Roller Assy - Long Gear Driven Roller
C3191-60096 Overdrive Roller - Shaft W/Rollers - Runs Width of Plotter Includes Overdrive Housing

Sensor
C3190-60012 Cover Sensor Assembly - No Longer Separately Available - Order the Control Panel Assembly
C3190-60140 Media Sensor Mech Assembly - Mounts to Right Side of the Entry Platen - Includes, Edge Measuring and Media Sensor and Holder

Separator
C3190-60013 Ink Separator - Mounted to Back of Primer Assembly - 8 Tubes Plug into Separator

Service Station, Reinigungs-Station
C3190-60142 Service Station Assembly - Mounted Behind Primer Assembly on Left Side of Plotter Chassis

Spittoon, Resttinenbehälter
C3190-60004 'Spittoon' Assembly - Contains Absorbers Which Hold Excess Ink From Cartridges (Mounts on Right Side of Plotter)

Spring
C1633-80005 Compression Spring - Goes Between Pincharm Assy and Bushing (7 Used)
C3190-80010 Belt Tensioner Spring - Mounted to Carriage Motor Assembly

Stand
C3193A Optio l Stand - Includes Legs, Casters, Brace and Wire Form Paper Defletor

Starwheel Mount
C4713-60035 Starwheel Mount Assembly (14 Used) - Includes: Cover, Body, Spring and Two Starwheels - Mounts on the Bail Assembly (Note: Part Number is for One Starwheel Mount Assembly ONLY)

Strip, Encoder
C4714-60098 Encoder Strip Assembly - Connects from Left to Right Side of Plotter - Includes Encoder Strip and Encoder Strip Spring

Support
C3190-40026 Control Panel Support - Mounts in Right Side Cover (Support is No Longer Available - Order the Control Panel Assembly)

HP DesignJet 230 C4695A Ersatzteile

 

Hier finden Sie uns, Lageplan
Drucker Service Arfert und Loose GbR
Bahrenfelder Chaussee 101
22761 Hamburg

Mail: info@edvdrucker.de
Tel: 040 / 57 50 35
Fax: 040 / 57 70 64
Montag bis Freitag von 8.00 bis 18.00 Uhr

Drucker Service Arfert und Loose GbR, Bahrenfelder Chaussee 101, 22761 Hamburg
© Copyright 1999 Arfert und Loose GbR. Alle Rechte vorbehalten

Drucker Service Arfert und Loose GbR

Tel: 040 / 57 50 35

Fax: 040 / 57 70 64

Drucker und HP DesignJet Plotter Dienstleistungen

Brother, Canon, Epson, Fujitsu, HP, Kyocera, Lexmark, Minolta, NEC, Oki, Philips, QMS, Samsung, Seikosha, Siemens, usw.